Emerson VE3008 KJ2005X1-MQ1 modular

E-mail:sakyzeng@foxmail.com

EMERSON VE3008

Specifications

Power, Mounting, and Memory

Power Requirement Supplied by System Power Supply through 2-wide Power/

Controller Carrier

Fuse Protection 3.0 A, non-replaceable fuses

Power Dissipation 5.0 W typical, 7.0 W maximum

Mounting On right slot of power/controller carrier

User Memory 48 MB

Primary Control Network 8-pin RJ-45 connector

Redundant Control Network 8-pin RJ-45 connector

LED Indicators (ON Status)

Green – Power Indicates DC power is applied

Red – Error Indicates an error condition

Green – Active Indicates that the controller is operating as the

primary controller

Green – Standby Indicates that the controller is operating as a backup controller

(reserved for future use)

Yellow flashing – Pri. CN Indicates valid primary control network communication

Yellow, flashing – Sec. CN Indicates valid secondary control network communication

All except Power flashing Visual identification of controller initiated from user interface

software by ping command

All except Power flashing, alternating even and odd Firmware upgrade in progress

DeltaV MQ Controller November 2022

www.emerson.com/deltav 4

Environmental

Operating Temperature* -40° to 70° C (-40° to 158° F)

Storage Temperature -40° to 85° C (-40° to 185° F)

Relative Humidity 5 to 95%, non-condensing

Airborne Contaminants ISA-S71.04-1985 Airborne Contaminants Class G3

Conformal coating

Shock (normal operating conditions) 10 g ½-sine wave for 11 ms

Vibration (operative limit) 1 mm peak-to-peak from 5 Hz to 16 Hz,

0.5 g from 16 Hz to 150 Hz

*Operating any electronics at the higher end of its temperature range for long periods of time will shorten its expected lifetime,

see Effects of Heat and Airflow Inside an Enclosure White Paper for more information.

Certifications

The following certifications are available on the MQ controller

(see actual certificates for exact certifications).

„ CE:

EMC- EN 61326-1

„ FM:

FM 3600

FM 3611

„ CSA:

CSA C22.2 No. 213

CSA C22.2 No. 61010-1

„ ATEX:

EN 60079-0

EN 60079-7

„ IEC Ex:

IEC60079-

IEC60079-7

„ Marine Certifications: IACS E10

ABS Certificate of Design Assessment

DNV Type Approval Certificate

„ Wurldtech:

Achilles Communications Certification Level 2

Hazardous Area/Location

The MQ Controller can be installed and used based on

the following Standards (see actual certificates for exact

product markings):

„ FM (USA):

Installation:

Class I, Division 2, Groups A, B, C, D, T4

„ cFM (Canada):

Installation:

Class I, Division 2, Groups A, B, C, D, T4

„ ATEX:

II 3G Ex ec IIC T4 Gc

„ IEC Ex:

Installation:

II 3G Ex ec IIC T4 Gc

Regarding the Installation instructions please refer to the following Documents:

Class 1 Division 2 Installation Instructions DeltaV M-series (12P1293)

Zone 2 Installation Instructions DeltaV M-series (12P2046