Emerson KJ2005X1-BA1 PLC VE3007 modular

EMERSON VE3007

Specifications

Power, Mounting, and Memory

Power Requirement Supplied by System Power Supply through 2-wide Power/

Controller Carrier

Fuse Protection 3.0 A, non-replaceable fuses

Power Dissipation 5.0 W typical, 7.0 W maximum

Mounting On right slot of power/controller carrier

User Memory 96 MB

Primary Control Network 8-pin RJ-45 connector

Redundant Control Network 8-pin RJ-45 connector

DeltaV MX Controller November 2022

www.emerson.com/deltav 4

LED Indicators (ON Status)

Green – Power Indicates DC power is applied

Red – Error Indicates an error condition

Green – Active Indicates that the controller is operating as the

primary controller

Green – Standby Indicates that the controller is operating as a backup controller

(reserved for future use)

Yellow flashing – Pri. CN Indicates valid primary control network communication

Yellow, flashing – Sec. CN Indicates valid secondary control network communication

All except Power flashing Visual identification of controller initiated from user interface

software by ping command

All except Power flashing, alternating even and odd Firmware upgrade in progress

Environmental

Operating Temperature* -40° to 60°C (-40° to 140°F)

Storage Temperature -40° to 85°C (-40° to 185°F)

Relative Humidity 5 to 95%, non-condensing

Airborne Contaminants ISA-S71.04-1985 Airborne Contaminants Class G3

Conformal coating

Shock (normal operating conditions) 10 g ½-sine wave for 11 ms

*Operating any electronics at the higher end of its temperature range for long periods of time will shorten its expected lifetime,

see Effects of Heat and Airflow Inside an Enclosure White Paper for more information.

E-mail:sakyzeng@foxmail.com