MotorolA MVME162-032 module

                              MotorolA MVME162-032 module

The MVME162 draws power from VMEbus backplane connectors P1 and P2.

P2 is also used for the upper 16 bits of data in 32-bit transfers, and for the upper

8 address lines in extended addressing mode. The MVME162 may not function

properly without its main board connected to VMEbus backplane connectors

P1 and P2.

Whether the MVME162 operates as a VMEbus master or as a VMEbus slave, it

is configured for 32 bits of address and 32 bits of data (A32/D32). However, it

handles A16 or A24 devices in the address ranges indicated in Chapter 3. D8

and/or D16 devices in the system must be handled by the MC68040/

MC68LC040 software. Refer to the memory maps in Chapter 3.

The MVME162 contains shared onboard DRAM whose base address is

software-selectable. Both the onboard processor and offboard VMEbus

devices see this local DRAM at base physical address $00000000, as

programmed by the MVME162Bug firmware. This may be changed via

software to any other base address. Refer to the MVME162 Embedded Controller

Programmer’s Reference Guide for more information.

If the MVME162 tries to access offboard resources in a nonexistent location and

is not system controller, and if the system does not have a global bus timeout,

the MVME162 waits forever for the VMEbus cycle to complete. This will cause

the system to lock up. There is only one situation in which the system might

lack this global bus timeout: when the MVME162 is not the system controller

and there is no global bus timeout elsewhere in the system.

Multiple MVME162s may be installed in a single VME chassis. In general,

hardware multiprocessor features are supported.

QQ:3321756460

Tel:86-1020721390

E-mail:sakyzeng@foxmail.com

WeChat: 18020721390

Honest service

1. Welcome to inquire at any time. I'm glad to receive your order and any related requests.

2. Ensure product quality standards.

3. Ensure timely delivery of goods.

4. Sincere service and after-sales guarantee.

5. We will reply to you within 24 hours as soon as possible.

6. For after-sales warranty, if you have any problems with the goods after receiving them,

Please contact us in time. We will give you a satisfactory solution.

7. For more details and the latest price, please feel free to contact us.

1. Digital motherboard: used for core control, calculation, storage, servo control, etc. The new motherboard integrates PLC control system functions.

2. PLC board: used for peripheral action control. The PLC board of the new system is integrated with the CNC main board.

3. I/O board: The early I/O board was used for switching signals between the NC system and the external. The I/O board mainly integrates display interface, keyboard interface, handwheel interface, operation panel interface and RS232 interface.

4. MMC board: man-machine interface board. Computerized board with CRT, standard keyboard, floppy drive, mouse, memory card and serial and parallel interfaces.

5. CRT interface board: used for display interface. In the new system, the CRT interface is integrated with the I/O board.

Xiamen Xiongba adheres to the business philosophy of integrity and win-win cooperation, and constantly develops new products

Provide good service for customers, pursue customer satisfaction, and constantly create new areas of business, sufficient inventory, fast delivery, welcome to inquire!

The information contained in this document is subject to change without notice.The reader should, in all cases, consult ICS Triplex Technology Ltd. to determinewhether any such changes have been made. From time to time, amendments tothis document will be made as necessary and will be distributed by ICS TriplexT echnology Ltd