IS210AEBIH3B | GE Controller Module

· GE IS210AEBIH3B is a high-performance one to two stepper driver designed based on the new generation 32-bit DSP technology.

· Power supply voltage: DC 24-80V

· Output phase current: 2.5A~6.0A

· Control signal input current: 6-16mA

· Cooling method: natural cold air

· Environmental requirements for use: Avoid metal dust, oil mist, or corrosive gases, with an ambient temperature of -10 ℃ to+45 ℃ and an ambient humidity of less than 

85% (non condensing)

· Weight: 0.7 kilograms

· High performance driver: Based on 32-bit DSP technology, the driving voltage is DC 20-50V, which can adapt to two-phase open-loop stepper motors simultaneously, 

and the continuous output current is within 4.0A (effective value).

· Strong adaptability: The flange size is 42/57mm, and the driver can adjust the current and speed by dialing to adapt to different motors.

· Control mode: spontaneous pulse speed control, 4 dials can be used for 16 speed ranges, or any speed can be set within the speed range through the upper computer.

· Design optimization: Three optoelectronic isolated digital inputs and one alarm output are used, with an internal control principle similar to servo, to ensure smooth 

operation of the motor at low speeds. Accurate current control technology greatly reduces motor heating.

· Multi axis drive and control: 4-in-1 design, using multi-core high-performance processors, supporting a single EtherCAT address, with four independent encoder interfaces 

and motor interfaces, can achieve "independent" drive and control of four axes.

· Used for equipment that requires low heat generation, low noise, high stability, and high precision, such as industrial automation control systems, robot control, etc.