GE IS200EPSMG1AEC modular

GE IS200EPSMG1AEC modular

GE IS200EPSMG1AEC

GE Baser multi axis motion controller is a motion controller based on PCI bus, which can be used to control stepping motor and servo system. It carries out motion planning through DSP and FPGA, supports arbitrary 2-axis linear and circular interpolation, and supports 3-axis and 4-axis linear interpolation. GE Laser provides 2-way laser control and supports auxiliary encoder. Through the library files in VC, VB, C #, Labview and other development environments provided by GE Baser, users can easily program the controller and build an automatic control system.

GE Laser multi axis motion controller can be used for laser cutting machines, laser welding machines, laser engraving machines and other laser equipment.

Functional features

point. Png 4-axis motion control

point. Png DSP high-speed motion planning

point. Png PWM laser control

point. Png energy following trajectory interpolation speed

point. Png supports any 2-axis linear and circular interpolation, and 3-axis and 4-axis linear interpolation

point. Png 8K interpolation buffer

point. Png hand pulse following function

point. Png supports machine/workpiece coordinate system

point. Png gantry control function

IS200EPSMG1A is a power supply module for GE EX2100 exciter. It can be bought, repaired, or exchanged from various vendors like World of Controls [0], Swan PLC [1], and Moore Automation [3]. The module is an essential component of the exciter and provides stable power supply to the system.

To use IS200EPSMG1A, it needs to be installed in the GE EX2100 exciter system. The installation process involves opening the exciter system and connecting the power supply module to the system's power source. The installation process may differ slightly based on the type of exciter system. Therefore, it is recommended to follow the installation manual provided by the manufacturer.

The IS200EPSMG1 developed by General Electric is an Exciter Power Supply Module manufactured for their Mark VI series. The MKVI is part of the Speedtronic line of gas/steam turbine management systems. The MKVI includes a PC-based operator interface, or HMI, which communicates with the main processor card in the Control Module using Ethernet connections. The operator interface allows for viewing of all analog and digital data from one location, including time tags for events and alarms.
The primary function of the Exciter Power Supply Module is to convert 125 VDC from the EPDM into voltages required by the control system with this including +5 VDC, +/-15 VDC and +24 VDC. It has been designed with a front panel that includes seven LED lights that are labeled P5, P15, N15, P24A, P24B, N24B, and P70. The front panel also includes the GE logo and the board identification number. The board features several large components including a transformer in a frame and a large inductor marked Bicron B9309 0912 as well as an additional smaller inductor coil (L2.) The board has five transistors fitted with heat sinks that are located directly behind the front panel with an additional four heat sink elements mounted to its surface.

This board uses both high voltage electrolytic capacitors and axial electrolytic capacitors created with both metal film and carbon composite resistors. There are nine fuses included in the board in different positions, several integrated circuits, TP test points and two backplane connectors.

GE IS200WNPSH1ABA

GE IS2020RKPSG3A

GE IS210AEBIH1BED

GE IS210AEBIH3BED

GE IS210AEDBH4AGD

GE IS210AEPSG1AFC

GE IS210SAMBH2AA

GE IS210SAMBH2AA 

GE IS210WSVOH1AE

GE IS215ACLEH1A

GE IS215ACLEH1AB

GE IS215ACLEH1BB