Consulting telephone:+86 18020721390
location: Home > product > DEIF

DEIF

The SCM-1 module consists of three boards connected by an eight wired bus on the front side (not the backplane bus). The boards for SCM-1 are named SCM-A, SCM-B and SCM-C and these names can be found on the boards.
SCM-A board:
Two relay-boards OPR-1 can be mounted.
One for output for a mechanical speed governor (instead of electronic speed governor), and one for outputs for mechanical voltage regulation (instead of electronic voltage regulation).

For replacement of OPR-1 the screw for holding SCM-A must be removed, replace the OPR-1 modules, mount SCM-A again to front panel and check that the eight wired bus is still connected from SCM-A to SCM-B.
SCM-B board:
DIP switches:
The I/O address for the backplane bus of the rack is to be set. Notices that all SCM-1, SCM-2 and PRM-1 modules must have different I/O addresses starting with number zero (null) and up to two. The number sequence can be interrupted. The I/O address is set by the S2 switch.
The SCM-1 module consists of three boards connected by an eight wired bus on the front side (not the backplane bus). The boards for SCM-1 are named SCM-A, SCM-B and SCM-C and these names can be found on the boards.
SCM-A board:
Two relay-boards OPR-1 can be mounted.
One for output for a mechanical speed governor (instead of electronic speed governor), and one for outputs for mechanical voltage regulation (instead of electronic voltage regulation).

For replacement of OPR-1 the screw for holding SCM-A must be removed, replace the OPR-1 modules, mount SCM-A again to front panel and check that the eight wired bus is still connected from SCM-A to SCM-B.
SCM-B board:
DIP switches:
The I/O address for the backplane bus of the rack is to be set. Notices that all SCM-1, SCM-2 and PRM-1 modules must have different I/O addresses starting with number zero (null) and up to two. The number sequence can be interrupted. The I/O address is set by the S2 switch.
The SCM-1 module consists of three boards connected by an eight wired bus on the front side (not the backplane bus). The boards for SCM-1 are named SCM-A, SCM-B and SCM-C and these names can be found on the boards.
SCM-A board:
Two relay-boards OPR-1 can be mounted.
One for output for a mechanical speed governor (instead of electronic speed governor), and one for outputs for mechanical voltage regulation (instead of electronic voltage regulation).

For replacement of OPR-1 the screw for holding SCM-A must be removed, replace the OPR-1 modules, mount SCM-A again to front panel and check that the eight wired bus is still connected from SCM-A to SCM-B.
SCM-B board:
DIP switches:
The I/O address for the backplane bus of the rack is to be set. Notices that all SCM-1, SCM-2 and PRM-1 modules must have different I/O addresses starting with number zero (null) and up to two. The number sequence can be interrupted. The I/O address is set by the S2 switch.

DEIF SCM-1 SYNCHRONIZING/MEASURING MODULE

Brand: DEIF

Model: DEIF SCM-1 SYNCHRONIZING/MEASURING MODULE

Origin: Switzerland

Warranty: 365 days

Quality: new/second-hand

Delivery method: express delivery

Telephone :+86 18020721390

WeChat:+86 18020721390Email:sakyzeng@foxmail.com

product details

The SCM-1 module consists of three boards connected by an eight wired bus on the front side (not the backplane bus). The boards for SCM-1 are named SCM-A, SCM-B and SCM-C and these names can be found on the boards.

SCM-A board:

Two relay-boards OPR-1 can be mounted.

One for output for a mechanical speed governor (instead of electronic speed governor), and one for outputs for mechanical voltage regulation (instead of electronic voltage regulation).

 

For replacement of OPR-1 the screw for holding SCM-A must be removed, replace the OPR-1 modules, mount SCM-A again to front panel and check that the eight wired bus is still connected from SCM-A to SCM-B.

SCM-B board:

DIP switches:

The I/O address for the backplane bus of the rack is to be set. Notices that all SCM-1, SCM-2 and PRM-1 modules must have different I/O addresses starting with number zero (null) and up to two. The number sequence can be interrupted. The I/O address is set by the S2 switch.

AGC200X_副本.png

Guizhou Yuanmiao to stop production control system parts, for the leading edge, we have a large amount of inventory and surplus control system parts, part of the control system hardware, we have also released a lot of new hardware and products to support your existing control system or the use of the latest control technology, stop production of“DCS system spare parts, spare parts PLC module, spare parts” whole machine and spare parts series, has a strong advantage as long as you need PLC products, we can help you find, the company has a great price advantage.

 

The company mainly imports PLC module, programmable controller, servo control system, and DCS spare parts, such as: ABB, AB, GE, Bently, Foxboro, Motorola, XYCOM, Honeywell, Yaskawa,Schneider, Rexroth, Yokogawa, Kuka, Ovation,Omron et al.

 

9785d81c53767f6fb68bc6fa0286e75.jpg


About Services

If you have any questions, please feel free to contact us via WeChat.

Terms and Disclaimers

For customer service, please contact us via email WeChat in time.

All items are subject to availability and pass our QA testing and inspection.

Many manufacturers or product names in our inventory are trademarks of their respective manufacturers.

Please contact us and confirm the product before placing an order.

Packaging and Handling

Item security ESD is packaged in custom shipping cartons for protection.

 

Buyer's note:

1. Our company is an offline entity and can issue 13% VAT invoice.

2. If you need to invoice customers, please take the initiative to price products are not taxed price (invoice tax points plus).

3. Express Way: sf-fon, Debon EMS, if you need to send other express way, purchase please communicate with us in advance.

4. When express delivery, please open the case and check it before signing for it. If the goods are damaged, they will not be returned.

5. If you find that other suppliers offer a lower price for the same product, we are willing to offer you a further discount by reference to their prices.

6. Products are in-kind shooting, no original packaging, store products are spot inventory, can be shipped at any time, all accessories are 3-6 months warranty period, the new original warranty for 1 year. Seven. On the receipt: When you receive the baby, please make sure that the outer packing is not damaged before signing for, such as inspection of goods found in short supply, shortage, you can refuse to sign and contact us in a timely manner.

 

 

微信图片_20231129085401.jpg



label: SCM-1

Related recommendations

Email

Email

sakyzeng@foxmail.com

WhatsApp

xuancheng Online

Need Help? chat with us

WeChat
Guizhou Yuanmiao
Top
XGuizhou Yuanmiao

Identification QR code

WeChat:+86 18020721390

(Copy and add friends)

  Open WeChat

WeChat has been copied, add consultation!