Bently Nevada 3500/53-03-00 Electronic Overspeed Detection System

Bently Nevada 3500/53-03-00 electronic overspeed detection system, each overspeed detection module receives a single sensor signal from a proximity probe sensor or 

magnetic pickup

· The input signal range is+10.0V to -24.0V, and the module will limit signals that exceed this range internally.

· Input impedance: 20k Ω.

· Power consumption: The typical power consumption is 8.0 watts.

· Working temperature:- 30 ° C to+65 ° C, storage temperature is -40 ° C to+85 ° C, humidity is 95% non condensing.

· Size and weight: The size is approximately 19cm x 18.5cm x 6.5cm, the weight is 0.42kg, and the transportation weight is 7kg.

· Overspeed protection: mainly used to monitor the speed of rotating equipment such as turbines, compressors, pumps, etc. When the equipment speed exceeds the set 

safety limit value, the system will promptly issue an alarm signal to prevent equipment damage, malfunction, and even safety accidents caused by overspeed, ensuring the 

safety of equipment and personnel.

· Fault diagnosis assistance: By real-time monitoring and analysis of equipment speed, it helps technicians determine the operating status and potential faults of the 

equipment. Abnormal changes in rotational speed may indicate mechanical, electrical, or other issues with the equipment, providing important basis for fault diagnosis.

· System Integration and Automation Control: This module can be used as part of the Bently Nevada 3500 series monitoring system, working in conjunction with other 

modules such as Keyphasor Module, Relay Module, Communication Gateway Module, etc., to achieve comprehensive monitoring and automation control of equipment. 

The detected overspeed signal can be transmitted to other control systems for further processing and control, such as automatic shutdown, deceleration, and other operations.