ABB 07AC91 modular

Technical data for 07 AC 91 In general, the technical system data listed under "System data and system configuration" in chapter 1 of volume 2 of the "Advant Controller 31" system description are valid. Additional data or data which are different from the system data are listed as follows. Technical data for the complete unit Permissible temperature range during operation 0...55 °C Rated supply voltage 24 V DC Max. current consumption 0.2 A Max. power dissipation 5 W Protection against reversed polarity of power connection yes Number of binary inputs 1 as enabling input for the analog outputs Number of analog input channels 8 or 16, depending on the operating mode Number of analog output channels 8 or 16, depending on the operating mode Electrical isolation CS31 system bus interface from the rest of the unit, 1 binary input from the rest of the unit Address setting and configuration Coding switch under the cover located on the right side of the housing Diagnosis see chapter "Diagnosis and displays" Operation and error displays a total of 17 LEDs, see chapter "Diagnosis and displays" Method of connections removable screw-type terminal blocks supply terminals, CS31 system bus max. 1 x 2.5 mm2 or max. 2 x 1.5 mm2 all other terminals max. 1 x 1.5 mm2 Max. length of the analog cables, two-core shielded and cross section > 0.5 mm2 100 m Conversion error of the analog values (non-linearity, factory calibration and resolution) typ. 0.5 %, max. 1 % Max. permissible potential difference between terminal M (minus of the supply voltage) and terminals AGND (minus of analog inputs and outputs) ± 1 V Common reference potential for all analog signals AGND (minus terminal of analog inputs and outputs) Electrical isolation of analog signals none (see also Fig. 5.4-2). Technical data of the binary input (enabling input for analog outputs) The analog outputs must be enabled by a binary 1 signal (24V) at terminals 25 (+) and 26 (-). Signal level 0 signal (-30...+5 V) voltage outputs are at 0 V, current outputs are at 0 mA 1 signal (+13...+30 V) analog outputs are active Electrical isolation yes, i.e. the reference potential and the control signal must be connected

Xi amen Xiongba E-commerce provides new spare parts, old spare parts and FOR spare parts for industrial control system.

If you have any questions, please feel free to contact us via WeChat.

Terms and Disclaimers

Xiamen Xiongba E-Commerce delivers goods worldwide and accepts PayPal and most credit cards. The prices shown are not actual prices. For customer service, please contact us via email WeChat in time.

All items are subject to availability and pass our QA testing and inspection.

Xiamen Xiongba supplies new, second-hand and parts products.

Xiamen Xiongba and its affiliated companies are not directly related to any company that we sell products. Many manufacturers or product names in our inventory are trademarks of their respective manufacturers.

Please contact us and confirm the product before placing an order.

Packaging and Handling

Item security ESD is packaged in custom shipping cartons for protection.

shipping

1. Transportation and handling costs (if applicable) will be increased when you order.

2. The order will be delivered after receiving the funds, and the time required depends on the customs clearance of the country where the customer's goods pass.

3. Any product discrepancy or damage must be contacted with us 24 hours after receipt.

4. International buyers: import duties, taxes and fees are not included in the commodity price or transportation cost. The expenses shall be borne by the Buyer. Please confirm the inspection fees with your customs to determine these additional fees before ordering.

E-mail:sakyzeng@foxmail.com