Bently Nevada 3500/54-03-00 | overspeed detection module

Bently Nevada 3500/54-03-00 overspeed detection module

· Usually, each module can receive a single signal from eddy current sensors or magnetic sensors, with an input signal range of+10.0V to -24.0V. The module will limit 

signals that exceed this range internally.

· Suitable for Bentley 3300 8mm eddy current sensor, 3300 16mm high-temperature eddy current sensor (HTPS), 7200 5mm, 8mm, 11mm and 14mm eddy current sensors, 

3300 RAM eddy current sensor or magnetic sensor, etc.

· The "03" in the model indicates three channels, which can provide three independent speed monitoring channels.

· To achieve the purpose of machine protection, modules usually provide various fast response alarm relay outputs, such as dangerous overspeed alarm, warning overspeed 

alarm, etc.

· The working temperature range is generally -30 ° C to+65 ° C, the storage temperature is -40 ° C to+85 ° C, the humidity is 95% non condensing, and it has good dust 

prevention, shock resistance, and anti-interference characteristics, which can adapt to harsh industrial environments.

· Mainly used to monitor the speed of rotating equipment such as turbines, compressors, pumps, etc. When the equipment speed exceeds the set safety limit value, the system 

will promptly issue an alarm signal and trigger corresponding protective actions through relay output, such as automatic shutdown, speed reduction, etc., to prevent 

equipment damage, failure, and even safety accidents caused by overspeed, ensuring the safety of equipment and personnel.

· By real-time monitoring and analysis of equipment speed, it helps technicians determine the operating status and potential faults of the equipment. Abnormal changes in 

rotational speed may indicate mechanical, electrical, or other issues with the equipment, providing important basis for fault diagnosis.

· This module can be used as part of the Bently Nevada 3500 series monitoring system, working in conjunction with other modules such as the Keyphasor module, Relay 

module, Communication Gateway module, etc., to achieve comprehensive monitoring and automated control of the equipment. The detected overspeed signal can be 

transmitted to other control systems for further processing and control.